Time Mark Corporation

Model 25 True RMS 3-Phase Monitor has a display that shows the voltage with an accuracy of +/- 0.5%.The display is updated every second and re-initialized every 30 seconds. Calibrated using a True RMS Voltmeter or can be restored to factory defaults.

The Model 2652 3-Phase Monitor is designed to protect motors, pumps, HVAC equipment, air compressors, etc., by sensing phase loss, low voltage or phase reversal.

The Model 64-5 Power Factor Regulator is a monitoring and power factor control system. It is designed to help obtain an improved power factor, with a minimum of added capacitors. This device uses a unique phase-angle sensing circuit.

Time Mark Corporation's Model 258 continuously monitors 3-phase power lines for abnormal conditions. When properly adjusted, the Model 258 monitor will detect phase loss on a loaded motor even when regenerated voltage is present.

During the month of November, we at Time Mark Corporation are making it known as "Pump and Liquid Level Controls" month. Featured products will include pump controls such as the Model 403 Pump Controller with Duplex pumping systems and much more!

Time Mark 261 Series of Alternating Controllers are our most popular selling controllers to date. These controls are designed for duplex pumping systems to equalize pump run time. The solid-state circuit drives an internal electromechanical relay.

The AC/DC voltage monitor supplies five core features created for the ease of the operator. They include: the ability to monitor over and under voltage, AC or DC from 15 to 260 volts, adjustable trip points, automatic reset and DPDT relay.

Time Mark Corporation is a leading manufacturer of power monitoring devices and makers of the Model 278 and Model 2780 Current Transducers, which are just two of the many UL Approved products Time Mark has to offer.

Reliable and easy to install, Time Mark Corporation’s Model 98A544 Smart Socket is the only socket which will allow monitoring of voltages up to 635VAC with a socket-mounted Time Mark phase loss relay.

Time Mark Alternating Controllers are used to sequence pumps, compressors, etc., to insure that each receives an equal amount of run time. Duplex (2-pump) versions are socket-mounted, triplex (3-pump) and multi (4-pump) versions in surface mount.