Edgetech Industries Llc

Ultra-high-temperature materials refer to the most heat-resistant high-grade materials that can be used as usual under severe environments such as stress and oxidation, and at an ultra-high temperature of about 2000°C.

Thermal spray alloy powder Thermal spraying is a surface strengthening technology. It uses a heat source in the form of electric arc, plasma arc, gas-oxygen, etc.

The atomization method is a powder preparation method in which a fast-moving fluid (atomization medium) impacts or otherwise breaks the metal or alloy liquid into fine droplets, and then condenses into a solid powder.

Titanium and its alloys have many advantages as surgical implant materials, such as low density, high strength, good toughness, good biocompatibility, non-toxicity, low elastic modulus, good corrosion resistance, and low X-ray absorption rate Etc.

The vast majority of single rare earth metals and their intermediate alloys are used to produce new rare earth metal materials such as neodymium iron boron, samarium cobalt permanent magnet, and super magnetostriction, and non-ferrous metal alloys

The most commonly used are tungsten nickel copper and tungsten nickel iron alloy with tungsten content of 90% -97%. Tungsten nickel copper alloy is a non-magnetic alloy, while tungsten nickel iron is a magnetic alloy.

The alloying principle of molybdenum is similar to that of tungsten. All the strengthening methods used to improve the heat resistance of tungsten are basically applicable to molybdenum.

The spectacle frame made of Nitinol severely deformed and then returned to normal. Similarly, a few years ago, when mobile phone antennas were made of Nitinol, they could bend without breaking or permanently bending.

The production efficiency of boron nitride produced by chemical vapor deposition is high, but this method is easy to introduce pores and impurities into the sintered body and anisotropy caused by hot pressing.

Yttrium, zirconium, niobium, molybdenum, ruthenium, rhodium, elements properties