UltraFlex Power Technologies

The soldering was carried out in complete safety, without requiring specific conditions, with no flame or toxic gas emissions.

This latest addition to UltraFlex suite of induction heating solutions will be presented at Tube Dusseldorf Show, 16 – 20 April 2018.

The demonstration showed that induction brazing could successfully replace the traditional flame-base brazing for tubes of different size, with the added benefit of cost and time efficiency.

This quick and easy joint soldering did not require frame flipping or special cleaning

The demonstration showed that UltraFlex High Power Induction System could complete the unbrazing and rebrazing within less than 60 seconds.

UltraFlex Power Technologies showed how a coaxial cables hand soldering process could be replaced with induction soldering

In the demonstration, 3 different combinations of power and frequency were used to achieve the target reflow temperature of 260°C (500°F).

Thanks to high melting efficiency and speed, UltraFlex induction heating systems are capable of producing up to 12 casting samples per hour in 24 hour operation.

This is the first Induction Brazing Robot integrating induction coil and automatic brazing alloy feeder

The demo showed how two brass inlet/outlet tubes can be evenly and simultaneously soldered to a brass assembly using induction heating.